WJ-HD200 SERIES CONTROL (TERMINAL MODE)
Matrix switcher can control Digital Disk Recorder WJ- HD200 Series. The following is the procedure of
Notes:
•The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p. 143.
•When a Multiplexer board is installed in the unit, you can neither connect nor control a
■Displaying WJ-HD200 Series
SETUP MENU
The operations are the same as WJ-HD500 Series. (Refer to p. 130.)
■Controlling Digital Disk Recorder WJ-HD200 Series
The following are the operating procedures of
Note: Refer to the operating instructions of Digital Disk Recorder
●Recorder Mode
The operations are the same as
●Manual Recording
The operations are the same as
Note: Refer to
●Stopping REC ONLY Alarm Recording
The operations are the same as
●Search Playback
You can search playback images using the ALARM RECALL table or the SEARCH table.
Every time you press the INDEX button, the display will change as follows.
Live image →
• Date-and-time Search Playback
The recorded images can be searched for through the date and time.
1.Enter the recorder mode. (Refer to p. 131 Recorder Mode.)
2.Press the INDEX button. The
F2
INDEX
●Multiscreen Segment Switching
The operations are the same as
Note:
SEARCH
YYYY/MM/DD HH:MM 2002/05/07 19:32
●Normal Playback
The operations are the same as
Note: You cannot skip to the previous/next record.
Note: The factory default setting is the current date and time.
