MONITOR SELECTION AND CAMERA SELECTION
After the
The operation begins with selecting a monitor, then the selected camera appears the active monitor.
■Monitor Selection
1.To select the desired monitor number (1 to 4), press the numeric button.
2.Press the MON (ESC) button to execute the selection. The MONITOR indicator on the controller will light up and the selected monitor number will appear on the LED display of the controller.
T&D | CAM ID | EVENT |
STILL | AUX1 OFF | AUX1 ON |
MON STATUS | ALL |
|
AUX2 OFF | AUX2 ON | |
ALM H | VLD H | SYS S |
SEQUENCE | DEF OFF | DEF ON |
MON (ESC) |
| CAM (SET) |
MON LOCK | MULTI SCREEN SEL | WIPER |
3.If the selected monitor number is not valid, the PROHIB- ITED indicator lights up and the number on the LED dis- play will blink for approximately 3 seconds.
Return to Step 1 and select a new monitor number.
Note: The PROHIBITED indicator will blink if an opera- tor with higher priority is controlling the monitor.Control of the same monitor is denied to an operator with lower priority.
■Priority Lock
●Applying Priority Lock
1.Select the desired monitor. (Refer to Monitor Selection).
2.Press the MON (ESC) button while holding down the SHIFT button to toggle the priority lock mode on and off on the active monitor.
If the priority lock mode is selected, the monitor number will inversely appear on the active monitor as shown in the figure.
Note: This function will prevent operators with lower priority from gaining control of a monitor.
However, higher or equal priority operators may still gain control of the monitor.
TOUR SEQ | T&D | CAM ID | EVENT |
|
| STILL | AUX1 OFF | AUX1 ON |
|
NEXT | MON STATUS | ALL |
|
|
| AUX2 OFF | AUX2 ON | M04 | |
PAUSE | ALM H | VLD H | SYS S | |
PAUSE | SEQUENCE | DEF OFF | DEF ON |
|
| MON (ESC) |
| CAM (SET) |
|
SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER |
|
●Releasing Priority Lock
1.Select the desired monitor. (Refer to Monitor Selection.)
2.Press the MON (ESC) button while holding down the SHIFT button to release the priority lock mode.
The monitor number returns to the normal display on the active monitor.
