Panasonic WJ-SX 150A manual Terminal Mode, 137, Displaying WJ-HD100 Series

WJ-HD100 SERIES CONTROL

MUX

(TERMINAL MODE)

Digital Disk Recorder WJ-HD100 Series are operable with the system controller, when the Multiplexer board is installed in the unit.

Note: Before the use, it is necessary to install the Multi- plexer board in the matrix switcher, connect the matrix switcher to the digital disk recorder, and con- figure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and WJ-HD100 Series SETUP MENU. [Refer to p. 32 Installing the Multiplexer Board, p. 45 Connection with Digital Disk Recorder WJ-HD100 Series, p. 63 WJ-SX150A SETUP MENU (OSD), p. 79 WJ-SX150A ADMINIS- TRATOR CONSOLE, and Displaying WJ-HD100 Series SETUP MENU in this page.]

■Displaying WJ-HD100 Series

SETUP MENU

The operations are the same as WJ-HD500 Series.

Refer to p. 130 Displaying WJ-HD500 Series SETUP MENU. The following functions and buttons are valid in SETUP MENU.

Joystick to R (B): Decrements a parameter

Joystick to L (A): Increments a parameter

■Controlling Digital Disk Recorder WJ-HD100 Series

The following are the operating procedures of WJ-HD100 Series via the system controller.

●Manual Recording

The operations are the same as WJ-HD500 Series. Refer to p. 132.

●Stopping REC ONLY Alarm Recording

The operations are the same as WJ-HD500 Series. Refer to p. 132.

●Search Playback

You can search playback images using the ALARM RECALL table or the SEARCH table.

Every time you press the INDEX button, the display will change as follows.

Live image → Date-and-time entry form → ALARM RECALL table → Live image

• Date-and-time Search Playback

The recorded images can be searched for through the date and time.

1.Enter the recorder mode. (Refer to p. 131 Recorder Mode.)

2.Press the INDEX button. The date-and-time entry form will appear on the center of the monitor.

F2

INDEX

●Multiscreen Segment Switching

The operating procedure is the same as WJ-HD500 Series. (Refer to p. 131.)

Note: 7-, 10-, or 13-segment multiscreen display is unavail- able.

●Normal Playback

The operations are the same as WJ-HD500 Series. (Refer to p. 131.)

Notes:

•You cannot skip to the previous/next record.

•Refer to WJ-HD100 Series Operating Instructions for details and other playback modes.

SEARCH

YYYY/MM/DD HH:MM 2002/05/07 19:32

Note: The factory default setting is the current date and time.

137