■Alarm History Table
There are 100 alarm records stored in chronological order in 10 pages of tables.
1.Select the desired monitor. (Refer to p. 3 Monitor Selection.)
2.Press the ALM RECALL button. "Alarm Recall" will appear on the LCD. The ALARM HISTORY table will appear on the active monitor as shown in the figure.
Alarm Recall
| ALARM HISTORY | 1 of 2 | |
NO | YYYY/MM/DD HH:MM:SS | ALARM | EVENT |
016 | 2002/08/21 18:59:08 | 80 | ALARM |
015 | 2002/08/21 18:58:08 | 80 | ACK |
014 | 2002/08/21 18:57:08 | 80 | RESET |
013 | 2002/08/21 18:55:08 | 07 | ALARM |
012 | 2002/08/21 18:54:08 | 07 | ACK |
011 | 2002/08/21 18:53:08 | 07 | RESET |
010 | 2002/08/21 18:53:00 | 09 | ALARM |
009 | 2002/08/21 18:52:08 | 09 | RESET |
008 | 2002/08/21 18:51:08 | 06 | ALARM |
007 | 2002/08/21 18:50:08 | 06 | ACK |
The columns in the table indicate the status as follows:
DATE: Lists the date and time when the alarm status changes.
ALARM: Lists the alarm number (01 - 99).
EVENT: Lists the event when the alarm status changes.
3.Press the + button to select the next page of the history, and press the – button to back up to the previous page.
4.To exit the mode, press the MON (ESC) or ALM RECALL button.
■Video Loss History Table
There are 100 video loss detection records stored in chronological order in 10 pages of table.
1.Select the desired monitor. (Refer to p. 3 Monitor Selection.)
2.Press the MENU button repeatedly until "VLD History" appears on the LCD.
VLD | History | 004 |
On | Off |
|
3.Press the F1 button.
The VIDEO LOSS HISTORY table will appear on the active monitor as shown in the figure.
| VIDEO LOSS HISTORY | 1 | of 2 | |
NO | YYYY/MM/DD HH:MM:SS | CH EVENT |
| |
012 | 2002/08/21 18:59:08 | 99 | VIDEO | RECOVER |
011 | 2002/08/21 18:58:08 | 14 | VIDEO | RECOVER |
010 | 2002/08/21 18:57:08 | 99 | VIDEO | LOSS |
009 | 2002/08/21 18:55:08 | 07 | VIDEO | LOSS |
008 | 2002/08/21 18:54:08 | R0 | SW RECOVER | |
007 | 2002/08/21 18:53:08 | 16 | VIDEO | LOSS |
006 | 2002/08/21 18:53:00 | 09 | VIDEO | LOSS |
005 | 2002/08/21 18:52:08 | R0 | SW LOSS | |
004 | 2002/08/21 18:51:08 | S1 | SLAVE | DOWN |
003 | 2002/08/21 18:50:08 | S1 | SLAVE | RECOVER |
The columns in the table indicate the status as follows:
DATE: Lists the date and time when the video loss status changes.
CH: Lists logical camera number, slave unit num- ber or recorder number that is connected to the system.
EVENT: Lists the event when the video loss status changes.
4.To exit the mode, press the F2 button or MON (ESC) button.
13
