Panasonic WJ-SX 150A manual Connection between the Units and Cameras, Recorder Connection

●Connection between the Units and Cameras

Connect each camera to CAMERA IN 1 to 16 of each unit. (Refer to p. 36 Connection with the Camera Sites.) Each camera has its own logical camera number.

The default setting of the logical camera numbers is as follows. (The logical camera numbers can be configured in SETUP MENU and WJ-SX150A Administrator Console.)

Camera total	Cameras connected	Cameras connected	Cameras connected	Cameras connected	Cameras connected
number	to Master	to Slave 1	to Slave 2	to Slave 3	to Slave 4
1 to 16	1 to 16	–	–	–	–
17 to 28	17 to 28	1 to 16	–	–	–
29 to 40	33 to 40	1 to 16	17 to 32	–	–
41 to 52	49 to 52	1 to 16	17 to 32	33 to 48	–
53 to 64	–	1 to 16	17 to 32	33 to 48	49 to 64

Connect the cameras and the Master/Slave 1 to 4 with the coaxial cables according to the diagram.

●Recorder Connection

Connect recorders to each Master/Slave units. Refer to pp. 40 to 47 for connection procedures.

Example: Master, Slave 1 and 2 are connected in the system.

Camera 40 39 38 37 36 35 34 33

Connected to Slave 2 Connected to Slave 1

Master unit

Master recorder

16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1
IN
OUT
16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1
							CAMERA
16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1
IN
OUT
16	15	14	13	12	11	10	9	8	7	6	5	4	3	2	1
							VIDEO

Notes:

•Recorders and/or the Multiplexer board cannot be connected to the Master unit when Slave 1 to 4 are connected in the system.

•The Master unit’s camera channels which loop thru Slave units cannot be connected to the recorder. (In the illustration, the Master unit’s CAM OUT 1 to 8 and the recorder’s VIDEO IN 1 to 8 cannot be connected.) The Master recorder can record only images from directly-connected cameras when the Master and Slave 1/2/3 are connected together. (For example in the illustration, the Master recorder can record images from Cam 33 to 40.) Camera input signals from Slave units to the Master unit are not for recording but for cross point switching.

54