Panasonic WJ-SX 150A manual Video Cable Connection, Data Port Connection

●Video Cable Connection

Connect the camera input connectors of Master and the monitor output connectors of Slave with coaxial cables as described in the diagram.

Connection	Master	Slave
	Camera Input 1	Monitor Output 1
Master and Slave 1	Camera Input 2	Monitor Output 2
	Camera Input 3	Monitor Output 3
	Camera Input 4	Monitor Output 4
	Camera Input 5	Monitor Output 1
Master and Slave 2	Camera Input 6	Monitor Output 2
	Camera Input 7	Monitor Output 3
	Camera Input 8	Monitor Output 4
	Camera Input 9	Monitor Output 1
Master and Slave 3	Camera Input 10	Monitor Output 2
	Camera Input 11	Monitor Output 3
	Camera Input 12	Monitor Output 4
	Camera Input 13	Monitor Output 1
Master and Slave 4	Camera Input 14	Monitor Output 2
	Camera Input 15	Monitor Output 3
	Camera Input 16	Monitor Output 4

●DATA Port Connection

•Connect the DATA 3 port of the Master unit and the DATA 4 port of the Slave units.

•Connect the Master and Slave units with the supplied crossing cable.

•Connect Slave and Slave with Cable Kit WV-CA48/10K.

•Set the termination selectors of the Master and terminal Slave unit to ON.

•Set the termination selectors of other Slave units to OFF.

•Connect system controllers to the Master unit. (Refer to p. 39.)

Example: Master, Slave 1 and 2 are connected in the system.

Slave 1

DATA HDR DATA 4 TERM

OFF ON

Slave 2

DATA HDR DATA 4 TERM

OFF ON

PS•DATA

PS•DATA

Cable Kit WV-CA48/10K

Connect the side		Cable Kit WV-CA48/10K
marked as “Slave”
to the DATA 4 port
of Slave 1.
Master
	DATA HDR DATA 4	DATA 3
TERM		Crossing cable
OFF	ON	(supplied to the unit)
	PS•DATA
Connect the side marked as
“Master” to the DATA 3 port
of Master.

Note: System controllers cannot be connected to Slave units.

53