Panasonic WJ-SX 150A manual Panasonic Models Terminal Mode

TIME-LAPSE VCR CONTROL

MUX

[PANASONIC MODELS] (TERMINAL MODE)

A time-lapse VCR (Panasonic Models) is operable with the system controller, while connecting to the matrix switcher.

Note: Before the use, it is necessary to install the Multiplexer board in the matrix switcher, connect the matrix switcher to the time-lapse VCR, and con- figure the system through WJ-SX150A Administrator Console, OSD SETUP MENU, and time-lapse VCR's SETUP MENU. (Refer to the operating instructions of matrix switcher.)

The following is the procedure of a Panasonic model time- lapse VCR.

●Rewind

1.During the stop, move the shuttle ring counterclockwise to rewind the tape.

2.Press the STOP button to stop rewinding.

Note: Pressing the PLAY/PAUSE button during rewind will start playback.

●Manual Recording

The operations are the same as WJ-HD500 Series. Refer to p. 20 Manual Recording.

■Controlling the Time-lapse VCR

The following are the operating procedures of the time- lapse VCR via system controllers.

●Multiscreen Segment Switching

The operations are the same as WJ-HD500 Series. (Refer to p. 18.)

Note: 7-, 10-, and 13- segment multiscreen display pat- terns are unavailable.

●Normal Playback

The operations are the same as WJ-HD500 Series. (Refer to p. 19.)

Note: You cannot skip to the previous/next record.

●Fast-forward

1.Move the shuttle ring clockwise to fast-forward the tape during the stop.

2.To stop fast-forwarding, press the STOP button.

Note: Pressing the PLAY/PAUSE button during fast-for- ward will start playback.

●Stopping REC ONLY Alarm Recording

The operations are the same as WJ-HD500 Series. Refer to p. 20.

34