MUX
(TERMINAL MODE)
Digital Disk Recorder
Note: Before the use, it is necessary to install the Multi- plexer board in the matrix switcher, connect the matrix switcher to the digital disk recorder, and con- figure the system through
■Displaying WJ-HD100 Series
SETUP MENU
The operations are the same as
Refer to p. 18 Displaying
3D joystick to the left (A): Decrements a parameter
3D joystick to the right (B): Increments a parameter
■Controlling Digital Disk Recorder WJ-HD100 Series
The following are the operating procedures of
●Manual Recording
The operations are the same as WJ-HD500 Series. Refer to p. 20.
●Stopping REC ONLY Alarm Recording
The operations are the same as WJ-HD500 Series. Refer to p. 20.
●Search Playback
You can search playback images using the ALARM RECALL table or the SEARCH table.
Every time you press the SEARCH/T&D SEARCH button, the display will change as follows.
Live image →
• Date-and-time Search Playback
The recorded images can be searched for through the date and time.
1.Enter the recorder mode. (Refer to p. 19 Recorder Mode.)
2.Press the SEARCH/T&D SEARCH button. The
●Multiscreen Segment Switching
The operating procedure is the same as
Note:
●Normal Playback
The operations are the same as
Notes:
•You cannot skip to the previous/next record.
•Refer to
SEARCH
YYYY/MM/DD HH:MM 2002/05/07 19:32
Note: The factory default setting is the current date and time.
32
