WJ-HD500 SERIES CONTROL (TERMINAL MODE)
Matrix switcher can control Digital Disk Recorder WJ- HD500 Series. The following is the procedure of
Notes:
•The following operating procedures are for the terminal mode. If you are using a PS·Data system controller, refer to p. 141.
•When a Multiplexer board is installed in the unit, you can neither connect nor control a
■Displaying WJ-HD500 Series
SETUP MENU
To display
1.Confirm that
2.Select the desired monitor. (Refer to p. 106 Monitor Selection.)
3.Enter the recorder mode. (Refer to p. 131 Recorder Mode.) Then, the selected monitor number and
4.Press the SETUP button while holding down the SHIFT button on the system controller.
The following functions and buttons are valid in SETUP MENU.
Joystick to UP (▲): Moves the cursor up.
Joystick to DOWN (▼): Moves the cursor down.
Joystick to L (t): Moves the cursor to the left.
Joystick to R (s): Moves the cursor to the right.
CAM (SET) button: Executes the selections and dis- plays a submenu.
NEXT button: Increments a parameter.
PREV button: Decrements a parameter.
MON (ESC) button: Returns to SETUP MENU or the previous menu.
|
|
| UP |
|
|
|
| L |
|
|
| R |
|
|
|
| DOWN |
|
|
|
F1 | ACK | RESET |
|
|
|
|
CAM SETUP | SUSPEND | ALL RESET |
|
|
| CALL |
|
|
|
|
|
| |
F2 | GROUP SEQ | TOUR SEQ | T&D | CAM ID | EVENT | PRESET |
INDEX | REW/FF | STILL | AUX1 OFF | AUX1 ON | PROGRAM | |
|
|
|
|
|
| PRESET |
| PREV | NEXT | MON STATUS | ALL |
|
|
| STEP |
| AUX2 OFF | AUX2 ON | AUTO PAN | |
RECORDER |
|
| ||||
STOP |
| PAUSE | ALM H | VLD H | SYS S | CAM FUNC |
|
|
|
|
|
| |
STOP | PLAY | PAUSE | SEQUENCE | DEF OFF | DEF ON |
|
| OSD |
| MON (ESC) |
| CAM (SET) | CLEAR |
SETUP |
| SHIFT | MON LOCK | MULTI SCREEN SEL | WIPER | LOG OUT |
5.To end the setting and return to the normal view, press the SETUP button while holding down the SHIFT button when SETUP MENU is displayed. The system con- troller's SETUP indicator will go out.
