Panasonic WJ-SX 150A manual WJ-HD300 Series Control WV-CU360C/CJ PS·DATA

WJ-HD300 SERIES CONTROL (WV-CU360C/CJ PS·DATA)

Available operations are in common with WJ-HD500 Series. (Refer to the unit's operating instructions.)

COMMUNICATION PROTOCOL (FOR USERS OF WJ-HD300 SERIES)

The following commands have been described in the operating instructions of this unit (matrix switcher). However, while Digital Disk Recorder WJ-HD300 Series are being connected to the unit, these commands will be changed as follows.

Recorder Control

Item	Transmission Command	Response (ASCII)	Parameter (ASCII)
	(ASCII)
Stop	CMD:RmmSPn	ANS:RmmSPn	mm=Monitor No.
			n=0	Stop playback
			n=1	Stop recording
			n=V Stop VMD search
Index	CMD:RmmSCn	ANS: RmmSCn	mm=Monitor No.
	(Described as		n=0:	Search playback*
	"CMD:RmmSC"		n=1: Time & date search playback**
	in the operating instructions)

* Transmission command changes the moni- tor display as follows.

Date-and-time entry form → Recording event list → VMD search list → Marking list → Date-and-time entry form...)

** Date-and-time entry form of matrix switcher appears.

Multiscreen segment switch-	CMD:RmmMLn	ANS:RmmML
ing	(Described as
	"CMD:RmmML"
	in the operating instructions)

mm=Monitor No. n=0: 4 segments n=1: 7 segments n=2: 9 segments n=3: 10 segments n=4: 13 segments n=5: 16 segments

n=skipped: Segment pattern change*

*Transmission command changes the multi-

screen segment pattern as follows.

4 (segments) → 7 → 9 → 10 → 13 → 16 → 4....

46