Problem

Check item

Remedy

The camera image is dim.

Dust may be sticking on the camera lens.

Remove the dust from the camera lens.

The camera’s lens focus may not be proper.

Press the FOCUS NEAR/ FAR buttons to adjust the lens focus. If the camera sup- ports auto focus, press these buttons simultaneously. The lens focus can be adjusted automatically.

The camera’s cable compensation set- ting may not be proper.

Open 730 COMPENSATION/VD2/DATA (refer to p. 74) or the Cable Compensa- tion/VD2 window (refer to p. 94) to con- firm the setting.

The camera is not operable.

The camera may not have been select-

Select the camera again. (Refer to p.

ed.

107.)

 

 

The camera may not support the function

Confirm whether the camera supports

you try to execute.

the function. (Refer to the camera's oper-

 

ating instructions.)

 

 

The camera's cable setting may wrong.

Open 730 COMPENSATION/VD2/DATA

 

(refer to p. 74) or the Cable

 

Compensation/VD2/DATA (refer to p. 94)

 

window to confirm the setting. If the cam-

 

era’s DATA is set to OFF, the cameras

 

will not be operable.

 

 

The data port setting may wrong.

Open the Data Port window (refer to p.

 

96) and confirm the setting.

 

When the BUSY indicator is lighting on

• Select another camera.

 

the system controller, a higher-priority

• Wait until a higher-priority operator fin-

 

operator has selected the camera.

ishes controlling the camera.

 

 

 

 

While the PROHIBITED indicator is light-

Open the Operator Registration window

 

ing on the system controller, you are pro-

(refer to p. 90) and reconfigure the set-

 

hibited to control the camera.

ting.

 

 

OSD items (Clock, Camera title, Monitor

• Turn off an overlapping item. (Refer to

status, Event) overlap one another.

p. 115.)

 

 

• Move OSD items. (Refer to p. 115.)

 

 

• Change the area title display position

 

 

through the camera’s setup menu.

 

 

(Refer to the camera’s operating

 

 

instructions.)

Tour/group sequence is not activated.

The tour/group sequence setting may be

Open 300 SEQUENCE (refer to p. 66),

wrong.

the Tour Sequence (refer to p. 84) or

 

Group Sequence (refer to p. 85) window

 

and reconfigure the setting.

 

 

The setting has not been put from the PC

Put the file to the unit again after the con-

to the unit.

figuration. (Refer to p. 83 Put a file to

 

SX150A.)

When the PROHIBITED indicator is light- ing on the system controller, you are pro- hibited to control the camera.

Open 800 OPERATOR REGISTRATION (refer to p. 76) or the Operator Registration window (refer to p. 90) and reconfigure the setting.

149

Page 145
Image 145
Panasonic WJ-SX 150A manual 149, Figuration. Refer to p Put a file to