Panasonic WJ-SX 150A Monitor Selection, Auto Login/Logout Auto Log- in/Log-out, Auto Login Box

■Monitor Selection

This window determines whether a system controller or PC can select a monitor.

●How to Display

To display this window, click on the (Monitor Selection) button in the main window (p. 80).

●Parameters

Select OK to permit each controller and the PC to control Monitor 1 to 4.

Select NG to restrict each controller and the PC to control Monitor 1 to 4.

(Save Exit) button

Saves the configuration and closes the Monitor Select win- dow.

(Cancel Exit) button

Cancels the configuration and closes the Monitor Select window.

■Auto Login/Logout (Auto Log- in/Log-out)

This window configures the auto log-in/log-out parameter of each data port.

An operator is selectable for auto log-in function.

The log-out time is selectable for auto log-out function.

●How to Display

To display this window, click on the (Auto Login/ Logout) button in the main window (p. 80).

●Parameters

• Auto Login Box

Click on the checkboxes Terminal_K1 to K4 to select an operator for auto log-in. Then, select an operator ID. It will be the log-in ID of the system controller connected to the data port.

• Auto Logout Box

Click on the checkbox of the data port connecting the sys- tem controller for auto log-out. Then, select the elapsed time for auto log-out.

(Save Exit) button

Saves the configuration and closes the Auto Login/Logout window.

(Cancel Exit) button

Cancels the configuration and closes the Auto Login/ Logout window.

Note: Both of auto log-in and auto log-out cannot be assigned to the same data port.

Either of them is selectable.

92