CAMERA SITE ACCESSORIES CONTROL
Note: This section describes the terminal mode. To operate in the PS·Data mode, refer to the operating instructions.
■Receiver Control
The following functions are available only when the receivers are included in the system and the specified camera housing is installed.
●Camera Housing Control
Wiper Control
1.Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.)
2.Press the WIPER button to turn on the housing wiper of the camera repeatedly until buttons are released.
Defroster Control
1.Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.)
2.Press the DEF ON/OFF button to turn on the housing defroster of the camera.
3.To turn off the defroster, press the DEF ON/OFF button while holding down the SHIFT button.
●Auxiliary Control
1.Select the desired monitor and camera. (Refer to p. 3 Monitor Selection and p. 3 Camera Selection.)
2.Press the AUX1 ON/OFF button to turn on the user's auxiliary switch 1 of the receiver.
Press the AUX1 ON/OFF button while holding down the SHIFT button to turn off the user's auxiliary switch 1 of the receiver.
3.Press the AUX2 ON/OFF button to turn on the user's auxiliary switch 2 of the receiver.
Press the AUX2 ON/OFF button while holding down the SHIFT button to turn off the user's auxiliary switch 2 of the receiver.
9
