Panasonic WJ-SX 150A manual OFF Mark

The following commands have been newly added. These commands are available only while Digital Disk Recorder WJ-HD300 Series are being connected to the unit.

Recorder Control

Item	Transmission Command	Response (ASCII)	Parameter (ASCII)
	(ASCII)
Disk selection	CMD:RmmDSn	ANS:RmmDS	mm=Monitor No.
			n=0	HDD normal/event recording sector
			n=1	HDD copy sector
			n=2	Disk connected to COPY 1
			n=3	Disk connected to COPY 2
A - B repeat playback	CMD:RmmRPn	ANS:RmmRP	n=0	A - B repeat playback OFF
			n=1	Set repeat start point (A point)
			n=2	Set repeat end point (B point)
Filtering ON/OFF	CMD:RmmLTn	ANS:RmmLT	mm=Monitor No.
			n=0	OFF
			n=1	ON
MARK	CMD:RmmMP	ANS:RmmMP	mm=Monitor No.
GO TO LAST	CMD:RmmPM	ANS:RmmPM	mm=Monitor No.
WJ-HD300 Series OSD dis-	CMD:RmmDI	ANS:RmmDI	mm=Monitor No.
play ON
(Refer to WJ-SX150A			Setup control commands are available.
Operating Instructions for WJ-			(Refer		to	WJ-SX150A	Operating
SX150A OSD ON/OFF.)			Instructions.)
DATA COPY window ON	CMD:RmmPD	ANS:RmmPD	mm=Monitor No.
			Setup control commands are available. (Refer
			to WJ-SX150A Operating Instructions.)
Text display ON	CMD:RmmDT	ANS:RmmDT	mm=Monitor No.
			Setup control commands are available.
			(Refer to WJ-SX150A Operating Instructions.)
List/Thumbnail	CMD:RmmTN	ANS:RmmTN	mm=Monitor No.
			Transmission command displays list or
			thumbnail alternately.

47