Maximum Idle Time, Operation Mode | D-Link DP-802 specification

Internet/Print Server User’s Guide

Must Be User Modified? Yes.

Description: A Domain Name Service (DNS) server address is used to translate URLs into their corresponding IP ad- dresses.

Maximum Idle Time

This setting allows you to set an idle time after which the inter- net/print server will automatically disconnect the WAN connection. Setting an idle time lets you keep from staying logged-in to your ISP when no one is using the internet.

Options: A time duration from 1 to 65535 minutes.

Default Value: 30 minutes

Must Be User Modified? No.

Description: The system will automatically disconnect the WAN link if the port is inactive for the time set.

Operation Mode

Options (sub-menus):

♦Mode: LAN-to-WAN / LAN-to-LAN; Default is LAN-to- WAN operation.

♦LAN-to-LAN Internet Server -> Global IP Address: Internet/print server’s address for the router segment when used in LAN-to-LAN mode only.

♦LAN-to-LAN Internet Server -> Subnet Mask: (as subnet mask above)

40	Configuration Settings

Image 52

D-Link DP-802 Maximum Idle Time, Operation Mode, Default Value 30 minutes Must Be User Modified? No, Options sub-menus

Contents

DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Quick Installation Getting Started Quick Installation Configuration Mandatory Settings for Internet Access Introduction About This GuideAudience Overview of the User’s Guide Introduction Product Features Product Description Internet Server Technology Non-Internet Implementations Introduction Installation Unpacking Desktop / Shelf Installation One lpr User’s Guide Wall Installation Port Description LED Description Serial WANParallel Printer RJ-45 LAN Pw/Tx Link/Rx Connecting to the Local Network Normal LED Flash Pattern LAN Connection Connecting to the Internet Connecting Power Connecting Power Internet Server Setup Setting IP Addresses Using the Default Address Default Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration DNS IP Address Default Value Must Be User Modified? YesISP Account Phone Number Default Value none Default Value none Must Be User Modified? YesISP Account User ID ISP Account Password Login Script Prompt Keyin Username Stepanka Password Abcd Choice ∙ DNS Domain Name Service an IP address provided by your ISP Operation Print Server Setup Print Server Features NetBEUI Connecting the Print ServerAppleTalk MacOS EtherTalk Print Server Configuration Print Server Setup Page Configuration Settings Navigation Controls System Configuration Default Value Must Be User Modified? NoServer Name Local LAN IP Address Default Value Local LAN Subnet Mask Operation Mode Default Value 30 minutes Must Be User Modified? NoMaximum Idle Time Options sub-menus Change Password WAN Port Configuration Default Value DialupDefault Value 115200 bps Line Type ISP Account User ID Modem AT Commands Options sub-settingsDial Prefix String Atdt default ISP Account IP Address Prompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name Parallel Port PJL Printer Parallel Port SpeedNetBEUI Workgroup Name Default Value LaserWriter Default Value LevelNetBEUI Maximum Connected Sta- tions AppleTalk Printer Type Default Value Standard Dhcp Server ConfigurationAppleTalk Font Group Options Yes/No Default Value Yes EnableIP Address Range Start Default Value 1440 24 hours IP Address Range EndIP Lease Time IP Reserve Table Server Address Configuration Local IP Address Protocol Advanced Control Configuration Manager Server IP AddressLog and Filter Dial-up Schedule Holiday Table Routing Table Display Information Filter NetBIOS over TCP/IPDisplaying Information Tools Dhcp Server Status Save Configuration DP-802 LED Post Error Indication Table TroubleshootingSystem Post Device Installation Problems WAN Station Configuration Problems Print Server Operating Problems Page Specifications General Environmental and Physical Modem AT Commands Basic AT Command Set Modem AT Commands Hook Switch Sn? Extended AT& Command Set Command Var Description Modem AT Commands Port Pinouts Serial Port Parallel Port RJ-45 Port Port Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration Glossary 100Mbps10Mbps Address Bandwidth Category 3, 4Collision Collision Domain Ethernet Fast EthernetHub In-band Mbps Leased-LineTelnet Twisted-pair UTP/STP Index AppleTalk Pinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card