D-Link DP-802 manual Advanced Control Configuration, Manager Server IP Address, Log and Filter

Internet/Print Server User’s Guide

Advanced Control Configuration

Manager Server IP Address

This setting is the IP address of the computer using the IS Manager Server software included with the device. The default IP address is 0.0.0.0.

Log and Filter

When set to Yes, the log and filter functions in IS Man- ager server software will be enabled. The internet server will create a log of all user connections and their status, viewable in the IS Manager program. The user filters also become op- erative, filtering connections by user, protocol and destination, as defined in the IS Manager program. Default setting is “No”.

Dial-up Schedule

The dial-up schedule settings are used to configure the internet server to dial out only at certain times. Default set- ting is “No”.

♦Enable

Enables/disables the dial-out scheduling feature.

♦Schedule Table

54 Configuration Settings