♦Dial Up – Dial the ISP phone access for one or the other WAN port using the configuration stored under the WAN port control.
♦Hang Up – Send the phone disconnect command string to the modem immediately to end the current session.
♦Reset – Return the internet/print server’s settings to their state prior to changes made this session and restart the device.
♦Factory Reset – Return the internet/print server’s set- tings to their original factory values and restart the device. Note that this will wipe out all information about how the settings are currently set.
♦Adjust Time – Choosing this option causes the internet server to contact the IS Manager Server to receive an up- dated time and date.
Save Configuration
This feature stores the current settings into the system firmware. Activation is followed by a prompt for confirmation.
Note: | When using | Telnet to modify device pa- | ||
| rameters, | saving | the | configuration |
| immediately ends the Telnet session. | |||
|
|
|
|
|
|
|
|
|
|
Configuration Settings | 59 |
