ISP Account IP Address, Modem AT Commands | D-Link DP-802 instruction

Internet/Print Server User’s Guide

ISP Account -> IP Address

Options: The IP address the ISP has assigned to this ac- count.

Default Value: 0.0.0.0

Description: Dial-up connections should use address 0.0.0.0 if the IP will be dynamically assigned at each connection. Otherwise, enter the IP address assigned by your ISP.

Modem AT Commands

Options (sub-settings):

♦Init. String: <AT&F> (default)

♦Dial Prefix String: <ATDT> (default)

♦Hangup String: <~~~+++~~~ATH0> (default)

Description: Modem AT commands are used to configure and operate the modem when it is necessary to control settings such as the speaker volume, line modulation, or handshaking protocol.

Note:	See your modem user’s guide for informa-
	tion about initialization string settings and
	other modem commands.

Note that the initialization string modem command must set the following:

1.Fixed baud rate (i.e., serial data rate adjustment dis- abled).

44	Configuration Settings

Image 56

D-Link DP-802 manual ISP Account IP Address, Modem AT Commands, Options sub-settings, Dial Prefix String Atdt default

Contents

DP-802 NWay Internet/Print Server User’s Guide Wichtige Sicherheitshinweise Page Limited Warranty Limitation of Warranties Limitation of Liability Vcci a Warning Table of Contents Print Server Setup WAN Port Configuration Specifications Glossary Index Quick Installation Getting Started Quick Installation Configuration Mandatory Settings for Internet Access Introduction About This GuideAudience Overview of the User’s Guide Introduction Product Features Product Description Internet Server Technology Non-Internet Implementations Introduction Installation Unpacking Desktop / Shelf Installation One lpr User’s Guide Wall Installation Port Description LED Description Serial WANParallel Printer RJ-45 LAN Pw/Tx Link/Rx Connecting to the Local Network Normal LED Flash Pattern LAN Connection Connecting to the Internet Connecting Power Connecting Power Internet Server Setup Setting IP Addresses Using the Default Address Default Addressing Example Using Your Own Address Settings Using Telnet to Configure the Server Using a Browser to Configure the Server Minimum Configuration ISP Account Phone Number Default Value Must Be User Modified? YesDNS IP Address ISP Account User ID Default Value none Must Be User Modified? YesDefault Value none ISP Account Password Login Script Prompt Keyin Username Stepanka Password Abcd Choice ∙ DNS Domain Name Service an IP address provided by your ISP Operation Print Server Setup Print Server Features AppleTalk MacOS EtherTalk Connecting the Print ServerNetBEUI Print Server Configuration Print Server Setup Page Configuration Settings Navigation Controls System Configuration Default Value Must Be User Modified? NoServer Name Local LAN IP Address Default Value Local LAN Subnet Mask Operation Mode Default Value 30 minutes Must Be User Modified? NoMaximum Idle Time Options sub-menus Change Password WAN Port Configuration Default Value DialupDefault Value 115200 bps Line Type ISP Account User ID Modem AT Commands Options sub-settingsDial Prefix String Atdt default ISP Account IP Address Prompt Keyin Username Nick Password Abcd Choice Parallel Port Port Name NetBEUI Workgroup Name Parallel Port SpeedParallel Port PJL Printer Default Value LaserWriter Default Value LevelNetBEUI Maximum Connected Sta- tions AppleTalk Printer Type AppleTalk Font Group Dhcp Server ConfigurationDefault Value Standard IP Address Range Start EnableOptions Yes/No Default Value Yes Default Value 1440 24 hours IP Address Range EndIP Lease Time IP Reserve Table Server Address Configuration Local IP Address Protocol Advanced Control Configuration Manager Server IP AddressLog and Filter Dial-up Schedule Holiday Table Routing Table Displaying Information Filter NetBIOS over TCP/IPDisplay Information Tools Dhcp Server Status Save Configuration System Post TroubleshootingDP-802 LED Post Error Indication Table Device Installation Problems WAN Station Configuration Problems Print Server Operating Problems Page Specifications General Environmental and Physical Modem AT Commands Basic AT Command Set Modem AT Commands Hook Switch Sn? Extended AT& Command Set Command Var Description Modem AT Commands Port Pinouts Serial Port Parallel Port RJ-45 Port Port Pinouts RJ-45 Twisted-Pair Cabling Active Pinout Configuration Glossary 100Mbps10Mbps Address Bandwidth Category 3, 4Collision Collision Domain Ethernet Fast EthernetHub In-band Telnet Leased-LineMbps Twisted-pair UTP/STP Index AppleTalk Pinout TCP/IP Offices Internet/Print Server User’s Guide Registration Card