DVD Setup Menu Options
E n g l i s h
Digital Audio Setup
The options included in Digital Audio Setup are:‘Digital Output’ and ‘LPCM Output’.
1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {DIGITAL AUDIO SETUP}, then press 2.
2Press the 3 4 keys to highlight an option.
3Enter its submenu by pressing 2.
4Press 3 4 to select a setting, then press OK to confirm your selection.
Digital Output
Set the Digital output according to your optional audio equipment connection.
➜Off:Turn off the digital output.
➜All: If you have connected your DIGITAL AUDIO OUT to a
➜PCM Only: Only if your receiver is not capable of decoding
Helpful Hints:
–If DIGITAL OUTPUT is set to ‘All’, all audio settings except MUTE are invalid.
LPCM Output
If you connect the DVD Player to a PCM compatible receiver via the digital terminals, such as coaxial or optical etc, you may need to adjust ‘LPCM Output’. Discs are recorded at a certain sampling rate.The higher the sampling rate, the better the sound quality.
➜48K: Playback a disc recorded at the sampling rate of 48kHz.
➜96K: Playback a disc recorded at the sampling rate of 96kHz that can only be achieved in
Sound Mode
The options included in Sound Mode Setup are: ‘3D’,‘Movie Mode’ and ‘Music Mode’.
1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {SOUND MODE}, then press 2.
2Press the 3 4 keys to highlight an option.
3Enter its submenu by pressing 2.
4Press 3 4 to select a setting, then press OK to confirm your selection.
3D
This function provides a virtual surround sound experience using just two speakers.
➜ Off, Living Room, Hall,Arena and
Church
Movie Mode
Select a Sound Mode that matches the type of music you are playing.These preset Sound Modes adjust the frequency bands of the video to enhance your favorite movie sound track.
➜Off, Sci-Fic,Action, Drama and Concert
Music Mode
Select a Sound Mode that matches the type of music you are playing.These preset Sound Modes adjust the frequency bands of the audio to enhance your favorite music.
➜Off, Digital, Rock, Classic and Jazz
TIPS: The underlined option is the factory default setting.
Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.
34
34 | 11/07/06, 2:02 PM |
