Philips DVP5140 user manual CD Upsampling Night Mode turning on/off, Off, 88.2 kHz, 176.4 kHz

DVD Setup Menu Options

CD Upsampling
	Night Mode - turning on/off

s h

This feature allows you to convert your music CD to a higher sampling rate using sophisticated digital signal processing for better sound quality. If you have activated the upsampling, the player will automatically switch to stereo mode.

1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {CD UPSAMPLING}, then press 2.

OFF

Select this to disable CD-upsampling.

88.2 kHz (X2)

Select this to convert the sampling rate of the CDs twice higher than the original.

176.4 kHz (X4)

Select this to convert the sampling rate of the CDs four times higher than the original.

2Press 3 4 to select a setting, then press OK to confirm your selection.

Helpful Hint:

–CD upsampling feature is only applicable to stereo output setting.

In this mode, the high volume outputs are softened. It is useful for watching your favorite action movie without disturbing others at night.

1In ‘AUDIO SETUP PAGE’, press 3 4 to highlight {NIGHT MODE}, then press 2.

ON

Select this to level out the volume. This feature is only available for movies with Dolby Digital mode.

OFF

Select this when you want to enjoy the surround sound with its full dynamic range.

2Press 3 4 to select a setting, then press OK to confirm your selection.

E n g l i

TIPS: The underlined option is the factory default setting.

Press 1 to go back to the previous menu item. Press SETUP to exit the menu item.

35

001-47 DVP5140_Eng_37_RC2 35 11/07/06, 2:02 PM