High End Systems DL.2 user manual Effect 1 Mode and Effect 2 Mode

CHAPTER 9

Graphic Functions: Opacity and Effects

Effect 1 Mode and Effect 2 Mode

Two Effect Mode parameters are available for each individual 3-D object, each with three Modifier parameters. Both Effect parameters have an identical list of color and visual effect options. This lets you apply a dual-effect combination to the selected 3-D object.

Note: Not all modes combine effectively. For example, you cannot glow a wobbulating object very well.

The table below describes the interaction between an Effect Mode parameter and its three associated Modifier parameters. You can find a detailed description and example of each option in Chapter 11: Effect Mode Descriptions.

Note: Modifier channels for Effect Mode 1 are labeled as CMY in the Wholehog 3 system so you can also make use of the color picker, HSI, and other Wholehog 3 functions. Use the CMY parameter controls to adjust the three Effect Mode 1 Modifier parameters for both the Global and Graphic fixture types. The default for Effect Mode 1 is set to CMY1 as well. Effect Mode 2 Modifier channels are labeled Mod 1, Mod 2, and Mod 3.

DMX	Effect Mode		Adjustments
Value
	Name/Definition	Modifier 1	Modifier 2	Modifier 3
0	Safe, no effects selection	NA	NA	NA
1	CMY (RGB inverse)	Cyan	Magenta	Yellow
2	CMY add to all pixels	Cyan	Magenta	Yellow
3	CMY add to all non-black pixels	Cyan	Magenta	Yellow
4	RGB add, all pixels	Red	Green	Blue
5	RGB add 2, all pixels	Red	Green	Blue
6	RGB add to all non-black pixels	Red	Green	Blue
7	RGB swap to GBR	Red to Green	Green to Blue	Blue to Red
8	RGB swap to BRG	Red to Blue	Green to Red	Blue to Green
9	Solarize 1 If color value < DMX value, invert color	Red	Green	Blue
10	Solarize 2 If color value > DMX, invert color	Red	Green	Blue
11	Solarize 3 If color value < DMX, set color to 0	Red	Green	Blue
12	Solarize 4 If color value > DMX, set color to 0	Red	Green	Blue
13	DotP and resample	Red	Green	Blue
14	Color cycle DMX value controls cycle speed	Red	Green	Blue
15	All or Nothing If color value > mod value	Red	Green	Blue
	color = 255, else color = 0
16	RGB, Solid color	Red	Green	Blue

100 DL.2 Digital Light User Manual