High End Systems DL.2 user manual Modifier, 161

CHAPTER 13

Effect Mode Options Descriptions

Modifier 1: This parameter allows you to select from three framing modes.

DMX	Action
Value

0Frames the image using an Internal Frame profile to control the Global Fade Edge parameter appearance.

1Frames the image using an Internal Frame profile to control the Global Fade Edge parameter appearance. Rendered Graphic Object content is selected at Frame texture using Modifier 3 parameter

2Image clipping changing operation of the Global Image Edge Fade parameters to Emulate Framing Shutters

Modifier 2: When the Modifier 1 DMX value = 0 or 1, this channel selects from profiles that vary in gradient density or pattern. When Modifier 1 DMX value = 2, this Modifier is not used.

Modifier 3: When Modifier 1 DMX Value = 1, this parameter determines how to use the rendered Graphic Object content as a texture for the frame. The image below shows an examples of

Modifier 1		Modifier 3
DMX Value	DMX	Action
	value
0	NA	Not Used
1	0	Graphic Object 1 texture without applied Effects
	1	Graphic Object 1 texture including its first applied Effect
	2	Graphic Object 1 texture including its first two applied Effects
	3	Graphic Object 1 texture including its first three applied Effects
	10	Graphic Object 2 texture without applied Effects
	11	Graphic Object 2 texture including its first applied Effect
	12	Graphic Object 2 texture including its first two applied Effects
	13	Graphic Object 2 texture including its first three applied Effects
	20	Graphic Object 3 texture without applied Effects
	21	Graphic Object 3 texture including its first applied Effect
	22	Graphic Object 3 texture including its first two applied Effects
	23	Graphic Object 3 texture including its first three applied Effects
2	NA	Not Used

DL.2 Digital Light User Manual 161