Nokia N93i manual 101, Select Options Advanced settings and from the following

Models: N93i

1 137
Download 137 pages 38.84 Kb
Page 112
Image 112

WLAN security sett. — Enter the settings for the selected security mode:

Security settings for WEP are as follows:

Wep key in use — Select the WEP key number. You can create up to four WEP keys. The same settings must be entered on the wireless LAN access point device.

Authentication type — Select Open or Shared for the authentication type between your device and the wireless LAN access point device.

WEP key settings — Enter WEP encryption (length of the key), WEP key format (ASCII or Hexadecimal), and WEP key (the WEP key data in the selected format).

Security settings for 802.1x and WPA/WPA2 are as follows:

WPA mode — Select the means of authentication: EAP to use an extensible authentication protocol (EAP) plug-in or Pre-shared key to use a password. Complete the appropriate settings:

EAP plug-in settings (only for EAP) — Enter the settings as your service provider instructs.

Pre-shared key (only for Pre-shared key) — Enter a password. The same password must be entered on the wireless LAN access point device.

TKIP encryption — Select whether Temporal Key Integrity Protocol (TKIP) is used.

Homepage — Define a home page.

Select Options > Advanced settings and from the following:

IPv4 settings: Phone IP address (the IP address of your device), Subnet mask (the subnet IP address), Default gateway (the gateway), and DNS address — Enter the IP addresses of the primary and secondary DNS server. Contact your internet service provider for these addresses.

IPv6 settings > DNS address — Select Automatic, Well-known, or User defined.

Ad-hoc channel (only for Ad-hoc) — To enter a channel number (1-11) manually, select User defined.

Proxy serv. address — Enter the address for the proxy server.

Proxy port number — Enter the proxy port number.

Packet data

The packet data settings affect all access points using a packet data connection.

Packet data conn. — If you select When available and you are in a network that supports packet data, the device registers to the packet data network. Starting an active

Copyright © 2006 Nokia. All rights reserved.

Settings

101

Page 112
Image 112
Nokia N93i manual 101, Select Options Advanced settings and from the following