1. Setting WPA-PSK or WPA2-PSK

From the on-screen menu on the projector, select [SETUP] → [INSTALLATION(2)] tab

→[NETWORK SETTINGS] screen and follow the instructions below.

➊Display the [NETWORK SETTINGS] screen.

•See page 17 of “Wired and Wireless Network Setup Guide” for setting wireless LAN.

➋Use the SELECT ▶ button to select the [WIRELESS] tab.

The [WIRELESS] page will be displayed.

➌Set items such as PROFILE, DHCP, IP ADDRESS, SUBNET MASK and others as required.

•Select [PROFILE 1] or [PROFILE 2] for [PROFILES]. If [EASY CONNECTION] is se- lected, WPA-PSK, WPA2-PSK, WPA-EAP, or WPA2-EAP is not available.

➍Use the SELECT ▼ button to select [ADVANCED SETTINGS] and press the ENTER button.

The [ADVANCED SETTINGS] screen will be displayed.

➎Select [SITE SURVEY] and press the ENTER button.

The “SSID” list will be displayed.