3. Setting WPA-EAP or WPA2-EAP

Select a wireless LAN compliant WPA-EAP or WPA2-EAP authentication and install a digital certificate on the projector.

❶Set [DATE, TIME PRESET] on the pro- jector. (See previous page)

❷Use a computer to save digital certifi- cates (files) for WPA-EAP or WPA2-EAP setting to your USB memory device.

After completing saving the file, remove the USB memory device from the computer.

Important:

•The file formats of digital certificate that are supported by the projector are DER and PKCS#12 only.

•The projector cannot handle any digital certificate whose file size exceeds 8 KB.

•CRL (Certificate Relocation List) is not supported.

•Client certificate chain is not supported.

❸Plug the USB memory device into the USB port of the projector.

WIRELESS

WIRELESS

3D

REFORM

 

 

AUTOADJUST

SOURCE

ON/

STAN

USB port

USB P

❹Repeat steps ❶ on page 5 to ❽ on page 6.

The pull-down list will be displayed.

❺Use the SELECT ▼▲ button to select [WPA-EAP] or [WPA2-EAP] and press the ENTER button.

❻Use the SELECT ▼ button to select the [TKIP/AES] field and press the ENTER button.

The pull-down list will be displayed.