Installation
Locating and Installing the Refrigerator
Installation
This refrigerator must be installed in accordance with these Installation Instructions for the certifications and the Norcold factory warranty to be in effect.
This appliance is design certified under the latest edition of ANSI Z21.19 Standards by the American Gas Association and is approved by the Canadian Gas Association.
Install the refrigerator in accordance with local codes. In the absence of local codes, the installation must conform with the following, as applicable:
In the United States:
∙The National Fuel Gas Code, ANSI Z223.1.
∙The manufactured Home Construction and Safety Standard, Title 24 CFR Part 3280.
When an external electrical source is utilized, the refrigerator, when installed, must be electrically grounded in accordance with local codes or, in the absence of local codes, the National Electrical Code, ANSI/NFPA 70.
In Canada:
∙Any applicable code.
∙Current Can
The refrigerator must be electrically grounded with the current Canadian Electrical Code C22.2 Parts 1 and 2.
Locating the Refrigerator
WARNING
Improper location, installation, adjustments, or unauthorized modifications can cause injury or property damage. Refer to this manual for proper instructions. For assistance or additional information consult a qualified installer, service agency, or your gas supplier.
Location
Figure 1
The Norcold refrigerator is to be located on a solid and level floor that is strong enough to support the com- bined weight of the refrigerator and its contents. Keep the refrigerator away from direct sunlight and other heat generating sources.
The refrigerator must be installed with the following clearances:
Top: | 6 inches minimum |
Right Side: | 2 inches minimum |
Left Side: | 0 inch minimum |
Bottom: | 0 inch minimum |
Rear: | 0 inch minimum |
Do not locate the refrigerator in an area where the flow of combustion and ventilation air is obstructed.
Notice: Never install the refrigerator directly on carpet- ing or vinyl floor covering. Carpeting or vinyl flooring must be protected by a metal or wood panel beneath the refrigerator. The panel should extend at least the full width and depth of the refrigerator.
Keep the refrigerator and the surrounding area clear and free of combustible materials, gasoline, and other flammable vapors and liquids.
3
