-Remove the flare nut from the orifice assembly [1] (See Art00956).

-Remove the orifice assembly from the burner [2].

WARNING: Do not try to remove the orifice [3] from the orifice adapter [4] when cleaning. Removal will

damage the orifice and seal of the orifice and can cause a propane gas leak. Leaking propane gas can ignite or explode which can result in dangerous personal injury or death. Do not clean the orifice with a pin or other objects.

-Clean the orifice assembly with air pressure and alcohol only.

-Using a wrench, assemble the orifice assembly to the burner.

-Assemble the flare nut to the orifice assembly.

-Examine all of the connections for gas leaks.

-Assemble the burner box cover.

Remove the Refrigerator

Your dealer or Norcold authorized service center must do this procedure.

CAUTION: The rear of the refrigerator has sharp edges and corners. To prevent cuts or abrasions when working on the refrigerator, be careful and wear cut resistant gloves.

WARNING: To avoid possible propane gas leaks, always use two wrenches to loosen and tighten the gas

supply line connections.

1.Close the valve at the propane gas tank(s).

2.Remove the black AC power cord and the white ice maker AC power cord (optional) from the receptacle.

3.Remove the DC wiring from the refrigerator:

-Put a mark on the DC wires so you can put them back in the correct location.

-Remove the DC fuse or remove the DC wiring from the battery or the converter.

-Remove the DC wires from the refrigerator.

4.Open the lower intake vent and remove the gas supply line from the bulkhead fitting of the refrigerator.

5.Remove the plastic plugs from the mounting flanges of the refrigerator.

6.Remove the screws from the upper and lower mounting flanges on the front of the refrigerator.

7.Remove the screws from the mounting flange at the rear of the refrigerator.

8.Remove the refrigerator from the opening.

Reinstall the Refrigerator

Your dealer or Norcold authorized service center must do this procedure.

WARNING: Make sure the combustion seal is not broken, is completely around the refrigerator mounting flanges, and is between the mounting flanges and the wall of the enclosure. If the combustion seal is not complete, exhaust fumes can be present in the living area of the vehicle. The breathing of exhaust fumes can cause dizziness, nausea, and in extreme cases, death.

1.Push the refrigerator completely into the enclosure.

2.Install the screws in the mounting flange at the rear of the refrigerator.

3.Install the screws from the upper and then the lower mount- ing flanges on the front of the refrigerator.

4.Put the plastic plugs into the mounting flanges of the refrigerator.

WARNING: To avoid possible propane gas leaks, always use two wrenches to loosen and tighten the LP gas supply line connections.

5.Attach the gas supply line to the bulkhead fitting of the refrigerator.

6.Open the valve at the propane gas tank(s).

WARNING: Do not allow the leak checking solution to touch the electrical components. Many liquids are electrically conductive and can cause electrical shorts and in some cases, fire.

7.Using a leak detecting solution, examine the gas supply line for leaks.

8.Connect the DC wiring to the refrigerator:

-Connect the DC wires to the refrigerator.

Owner’s Manual 12

Page 11 Page 13
Page 12
Image 12
Norcold 120x owner manual Remove the Refrigerator, Reinstall the Refrigerator
Page 11 Page 13

120x specifications

The Norcold 120X is a prominent choice in the realm of absorption refrigerators, particularly favored in recreational vehicles (RVs), campers, and various off-grid applications. Boasting a range of features and technologies, the Norcold 120X presents a combination of efficiency, reliability, and convenience for users seeking a dependable cooling solution.

One of the standout features of the Norcold 120X is its dual-power capability. This versatile refrigerator can operate using both AC (alternating current) and DC (direct current) power, offering users flexibility depending on their energy source. Additionally, it can run on propane gas, which is ideal for off-grid scenarios where electric power may be limited. This multi-fuel functionality ensures that users can always rely on the Norcold 120X for consistent cooling, regardless of their location.

The Norcold 120X is designed with user convenience in mind. It features an intuitive control panel that allows users to easily monitor and adjust the temperature settings. With adjustable shelves and door bins, the interior layout can accommodate various food items and maximize storage efficiency. The refrigerator's sleek and compact design ensures it fits seamlessly into smaller spaces typically found in RVs or campers.

Another important characteristic of the Norcold 120X is its advanced absorption cooling technology. Utilizing a unique combination of ammonia and water as refrigerants, the absorption system produces minimal noise levels, making it a suitable choice for those seeking a quiet environment. Furthermore, the absence of mechanical compressors helps to reduce energy consumption, enhancing its overall efficiency.

In terms of insulation, the Norcold 120X boasts high-performance thermal insulation that enhances its cooling capabilities. This feature helps maintain internal temperatures even in hotter external environments, ensuring food and beverages remain fresh for extended periods.

Safety is also a priority with the Norcold 120X, which includes features such as a safety shut-off valve and a robust exterior casing to withstand the rigors of travel.

Overall, the Norcold 120X represents a fusion of innovative technology and practical design. With its reliability, energy efficiency, and user-friendly features, it undoubtedly stands out as a leading choice for those in need of a dependable refrigeration solution on the road.
Top Page Image Contents