Norcold NRF30 manual Set theTemperature, Art02216

Set theTemperature

The Temperature Setting Panel (see Art02216) has two modes of operation, the Factory setting mode and the Memory setting mode. In both modes, you may set the controls to maintain the temperature, in the center part of the refrigerator/freezer, between -13°F -(25°C) and 108°F (42°C).

Push and hold both the up arrow and the “set” button for a few seconds to change the temperature display back and forth between Fahrenheit (°F) and Celsius (°C).

Power

Error

Set

° F

▲ ▼

° C

Factory setting mode

Art02216

Each time that you turn the refrigerator/freezer “ON”, the temperature setting is 5°F (-15°C). If you wish to change the temperature setting:

-Press and hold the “set” button for 2 seconds.

-Press and hold either the up or down arrow until the desired temperature appears in the window.

-Release the up or down arrow to select the temperature setting.

Memory setting mode

The first time that you turn the refrigerator/freezer “ON”, the temperature setting is 5°F (-15°C). If you wish to change the temperature setting:

-Press and hold the “set” button for 2 seconds.

-Press and hold either the up or down arrow until the desired temperature appears in the window.

-Release the up or down arrow to select the temperature setting.

-Press and hold the “set” button for 2 seconds.

-The next time that you turn the refrigerator/freezer “ON”, the temperature setting will be at this same setting, unless you choose to change it.

NOTE: The refrigerator/freezer has a delay protection feature to avoid overloading the vehicle at start-up. The temperature shown in the window should change within the first 15 minutes of operation.

When not using the refrigerator/freezer, remove the DC power cord from the cigarette lighter to prevent discharge of the battery.

5