3.Slide a Brace (2) onto the bracket on one of the Uprights (1). Attach the Brace to the Upright with two M10 x 65mm Bolts (26), four M10 Washers (3), and two M10 Nylon Locknuts (7). Do not tighten the
Nylon Locknuts yet.
Slide the Upright (1) and the Brace (2) onto the M10 x 65mm Carriage Bolts (24) and the M8 x 65mm Carriage Bolts (38) in the left Base (4). Attach the Upright with two M10 Nylon Locknuts (7). Attach the Brace with two M8 Washers (35) and two M8 Nylon Locknuts (37). Do not tighten the Nylon Locknuts yet.
4.Slide the remaining Brace (2) onto the bracket on the other Upright (1). Attach the Brace to the Upright with two M10 x 65mm Bolts (26), four M10 Washers (3), and two M10 Nylon Locknuts (7). Do not tighten the
Nylon Locknuts yet.
Slide the Upright (1) and the Brace (2) onto the M10 x 65mm Carriage Bolts (24) and the M8 x 65mm Carriage Bolts (38) in the right Base (4). Attach the Upright with two M10 Nylon Locknuts (7). Attach the Brace with two M8 Washers (35) and two M8 Nylon Locknuts (37). Do not tighten the Nylon Locknuts yet.
3 |
|
|
| 1 |
|
| 7 |
|
| 3 |
|
|
| 2 |
| 3 | 26 |
|
| |
| Bracket | 37 |
|
| 35 |
| 7 |
|
|
| 38 |
|
| 4 |
| 24 |
|
4 |
|
|
1 |
|
|
26 |
|
|
3 |
|
|
|
| 2 |
3 | 7 |
|
Bracket |
| 37 |
|
| 35 |
| 38 |
|
7 |
|
|
| 4 |
|
24 |
|
|
7
