HOW TO USE CUSTOM PROGRAMS
1Insert the key fully into the console. See GETTING STARTED on page 11.
2Select one of the custom programs.
When the key is inserted, the manual mode will be selected. To select a custom program, first press the Select Goal button repeatedly until the words “CUSTOM PROGRAM” appear in the main dis- play. Next, press the Select Course button repeat- edly to select the Learn 1 or Learn 2 program.
Three seconds after a custom program is se- lected, the name of the selected program and the total program time will begin to scroll across the main display.
The program display will show the first speed set- tings of the program you have selected (see the drawing below). Note: If only three columns of indicators are lit in the program display, see HOW TO CREATE A CUSTOM PROGRAM on page 16.
3start the program.
A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and
incline settings that you programmed previously. Hold the handrails and begin walking.Press the Start button or the Speed + button to
Each program is divided into several
of the program display. (The in-
cline settings are not shown in the program display.) The speed set- tings for the next
several segments will be shown in the columns to the right.
When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash, a se- ries of tones will sound, the speed setting and the incline setting will flash in the main display, and all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the second speed and incline settings that you pro- grammed previously.
The program will continue until the speed setting for the last segment is shown in the Current Segment column and no time remains in the pro- gram. The walking belt will then slow to a stop.
If desired, you can redefine to the program while using it. To change the speed or incline setting during the current segment, simply press the Speed or Incline buttons. When the current segment is completed, the new setting will be saved in mem- ory. To increase the length of the program, first wait until the program is completed. Then, press the Start button, and program speed and incline settings for as many additional segments as desired. (Note: While you are adding segments to the program, the speed settings in the program display will not move to the left. Instead, each time a segment is completed, the flashing Current Segment column will move one column to the right. If the Current Segment column reaches the right side of the pro- gram display, when the current segment is com- pleted all columns of indicators in the program dis- play will move three columns to the left.) When you have added as many segments as desired, press the Stop button twice. To decrease the length of the program, press the Stop button twice at any time before the program is completed.
To stop the program temporarily, press the Stop button. The time will begin to flash in the main dis- play. To restart the program, press the Start but- ton or the Speed + button. To end the program, press the Stop button, remove the key, and then reinsert the key.
4Follow your progress with the displays. See step 5 on page 12.
5When the program has ended, remove the key. See step 7 on page 15.
17
