NordicTrack NTL2495.2 user manual Problem The remote control does not function properly

•Blue Screen—If the treadmill is located in the fringe area of a television station where the signal is weak, the picture may be of poor quality or a blue screen may appear. If the signal is weak, it may be necessary to install an external antenna to improve the picture.

Note: If one of these symptoms appears when the cable from a CATV company is connected, the symptom may be caused by the local company broadcast.

PROBLEM: The remote control does not function properly

SOLUTION: a. When pressing buttons on the remote control, point the remote control toward the sensor on the pulse bar. Make sure that the sensor is not exposed to direct sunlight.

a

Sensor

b. Make sure that the batteries in the remote control are properly installed. If the batteries are prop- erly installed, replace the batteries. (See assembly step 7 on page 10.)

32