TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 8). Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c. Check the circuit breaker located on the treadmill

near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

d. Check the on/off switch located on the treadmill near the power cord. The switch must be in the on position.

c

Tripped

Reset

d

On

Position

PROBLEM: The power turns off during use

SOLUTION: a. Check the circuit breaker located on the treadmill frame near the power cord (see c. above). If the

circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in.

c. Unplug the power cord, wait for five minutes, and then plug the power cord back in.

d. Remove the key from the console. Reinsert the key fully into the console.

e. Make sure that the on/off switch is in the on position.

f. If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and unplug the power cord. Carefully tip the treadmill down as shown in drawing a. Remove the Screws (83) from the hood. Raise the Uprights (69) and carefully remove the hood.

Locate the Reed Switch (10) and the Magnet (7) on the left side of the Pulley (8). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw

(27)and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, and run the treadmill for a few minutes to check for a correct speed reading.

a

 

 

83

69

 

1/8”

8

27

 

10

7

Top

 

View

 

26

Page 25 Page 27
Page 26
Image 26
NordicTrack NTTL10610 manual Troubleshooting, Problem The power turns off during use, Top
Page 25 Page 27

NTTL10610 specifications

The NordicTrack NTTL10610, also known as the Commercial Series treadmill, is a high-performance piece of equipment designed for fitness enthusiasts who seek a robust workout experience. This treadmill is equipped with a range of features that enhance user engagement and workout efficiency, making it a popular choice among home gym setups.

One of the standout features of the NordicTrack NTTL10610 is its powerful 3.5 CHP motor, which ensures smooth and quiet operation. This heavy-duty motor can handle intense workouts and provides a consistent performance, allowing users to run or walk at various speeds without any lag. The treadmill reaches speeds of up to 12 mph and can incline up to 15 percent, enabling users to simulate challenging terrains and maximize their cardiovascular workouts.

The 22-inch full-color touchscreen display is another significant highlight, providing an intuitive interface for navigating workout programs, tracking performance metrics, and adjusting settings. With access to the iFit membership, users can explore a vast library of on-demand workouts led by professional trainers, participate in daily challenges, and even simulate outdoor runs in different environments thanks to the Google Maps integration.

The treadmill features a spacious running surface of 60 inches in length, which accommodates users of all sizes and allows for a comfortable stride. The FlexSelect cushioning system is designed to reduce impact on joints, enhancing comfort during workouts and minimizing the risk of injury. Users can easily adjust the cushioning to suit their preference, whether they prefer a softer surface or a firmer feel.

For added convenience, the NordicTrack NTTL10610 includes built-in Bluetooth speakers, allowing users to stream music or audio from their devices during workouts. Additionally, it features integrated Wi-Fi connectivity, enabling users to stay connected and access their favorite apps while exercising.

Other characteristics include a sturdy frame design, easy-fold technology for space-saving storage, and a variety of safety features such as an emergency stop switch. Overall, the NordicTrack NTTL10610 is an advanced treadmill offering a combination of technology, performance, and user-friendly features, making it an excellent investment for achieving fitness goals in the comfort of home.
Top Page Image Contents