NordicTrack NTTL11992 user manual Assembly, Your own phillips screwdriver and wire cutters

ASSEMBLY

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench

and your own phillips screwdriver and wire cutters .

Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1. With the help of a second person, carefully raise the	1
treadmill to the upright position.
While a second person tips the treadmill to one side
and holds it, insert one of the Extension Legs (102) into
the treadmill as shown. Make sure that the Extension
Leg is turned so the Base Pad (99) is on the bottom.
Next, tip the treadmill to the other side and insert the
other Extension Leg (not shown) in the same way. Lower
the side of the treadmill so that both Extension Legs
(102) are resting flat on the floor.			102
With the help of a second person, carefully lower the
treadmill frame.			99
2. Press the Lock Knob Sleeve (70) into the left Upright (69).	2
Make sure that the Lock Pin Collar (72) and the Spring
(71) are on the Lock Pin. Insert the Lock Pin into the Lock
Knob Sleeve (70) and the left Upright (69). Next, press
the Lock Knob Spacer (117) onto left Upright. Tighten the			69
Lock Knob (68) onto the Lock Pin.
	68
			70
		117	71
			72
			74
3. With the help of a second person, tip the Uprights (69)	3
down as shown. Make sure that the Extension Legs
(102) remain in the Uprights.
Attach each Extension Leg (102) with two Screws (80) as		99
shown.
With the help of a second person, carefully tip the		Frame
Uprights (69) back to the vertical position.			69
	69
Note: One replacement Base Pad (99) may be included.			80
Use the Base Pad to replace any Base Pad that becomes		80	102
worn.	99
		102

6