HOW TO CREATE CUSTOM PROGRAMS
1 Insert the key fully into the console.
See GETTING STARTED on page 10.
2 Select one of the custom programs.
When the key is inserted, the manual mode will automatically be selected. To select one of the custom programs, first press the Select Workout Goal button repeatedly until the letters “CUSTOM PROG” appear in the main display.
Next, press the Select Course button repeatedly to select the Learn 1 or Learn 2 program.
When you select a custom program, the left side of the main display will flash the maximum incline setting for the program and the right side of the display will flash the maximum speed setting for the program for ten seconds. Three seconds after a custom program is selected, the name of the se- lected program and the total program time will begin to scroll across the main display.
3 Press the Start Program button or the Speed + button to start the walking belt.
A moment after the button is pressed, the walking belt will begin to move. Hold the handrails and begin walking.
4 Press the Record button and program the desired speed and incline settings.
When the Record button is pressed, the indicator beside the button will light. Speed and incline set- tings can be programmed only when the indica- tor is lit. Note: When the indicator beside the Record button is lit, the main display will show the elapsed time instead of the time remaining in the program.
Refer to the program display. Each custom pro- gram is divided into
will be shown in the
flashing Current Segment column of the program dis- play. (The incline settings are not
shown in the pro-
gram display.) To program the desired speed and incline settings for the first segment, simply adjust the speed and incline of the treadmill to the de- sired levels with the Speed and Incline buttons. Every few times one of the Speed buttons is pressed, an additional indicator will light or darken in the Current Segment column.
When the first segment of the program is com- pleted, the current speed setting and the current incline setting will be stored in memory. All columns in the program display will then move one column to the left and the speed setting for the second segment will be shown in the flashing Current Segment column. Program speed and incline settings for the second segment as de- scribed above.
Repeat this procedure until you have programmed speed and incline settings for as many
To stop the program temporarily, press the Stop button. All displays will pause and the time will begin to flash in the main display. To restart the program, press the Start Program button or the Speed + button.
5 Press the Stop button, remove the key, and then reinsert the key.
When you have programmed speed and incline settings for as many segments as desired, press the Stop button, remove the key, and then reinsert the key. The speed and incline settings that you programmed and the number of completed segments will be stored in memory. To use the custom program, see HOW TO USE CUSTOM PROGRAMS on page 15.
6 Remove the key.
See step 6 on page 13.
14
