![](/images/new-backgrounds/1290015/29001529x1.webp)
darken in those columns as well.) Important:
When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
To stop the program at any time, press the STOP button. The time will begin to flash in the main dis- play. To restart the program, press the START but- ton. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
4 Follow your progress with the main display.
Refer to step 5 on page 12.
5 Measure your heart rate if desired.
Refer to step 6 on page 13.
6 Whenkey. the program is completed, remove the
Step onto the foot rails. Remove the key from the console and put the key in a secure place. Note: If the displays and indicators on the console re- main lit after the key is removed, the console is in the “demo” mode. Refer to page 23 and turn off the demo mode.
When the treadmill is not in use, switch the on/off switch near the power cord to the off position and unplug the power cord.
HOW TO USE PULSE-DRIVEN PROGRAMS
1 Put on the chest pulse sensor.
You must wear the chest pulse sensor to use a
2 Insert the key into the console.
Refer to GETTING STARTED on page 11.
3 Select one of the three pulse-driven programs.
When the key is inserted, the manual mode will be selected. To select one of the three
When a
During
programs, the matrix will show a moving graphic that repre- sents your heart rate. Each time a heart-
beat is detected, an
additional peak will appear in the graphic.
15