Setup and assembly
Figure 3: Connecting the Expansion Module
4.If connecting a second, or a third Expansion Module, repeat steps 2 to 4.
Note: The second Expansion Module is attached to the right side of the first Expansion Module. The third Expansion Module is attached to the right side of the second Expansion Module.
5.Adjust the height of the IP Phone tilt adjustment to a comfortable viewing angle. Then adjust each of the Expansion Module foot stands so they are flush to the desk surface. Turn the wheel on the back right side of the Expansion Module to the right (if viewed from the front) to tighten the Expansion Module.
WARNING
Do not over tighten the wheel on the Expansion Module.
6.Connect power to the IP Phone. The Expansion Module powers up.
Note: The Expansion Module uses the electrical connection of the IP Phone for power. It does not have its own power source.
13
