Telephone features
Page | FEATURE 60 and code (1 to 3) and zone (0 to 6) |
| Make a page announcement through either the internal (code 1) or |
| external (code 2) speakers, or both (code 3). Zone 0 pages all zones. |
| Page announcements are programmed to timeout after a |
| amount of time which is set by your System Administrator. |
Internal page
FEATURE 61 and zone (0 to 6)
Make a page announcement to all, or to a specific group of telephones, through the telephone speakers. Zone 0 pages all zones.
| External page |
| FEATURE 62 |
| Make a page announcement through an external loudspeaker system. |
| Internal and external page |
| FEATURE 63 and zone (0 to 6) |
| Make a page announcement through both your telephone speakers and an |
| external loudspeaker system. Zone 0 pages all zones. |
| Incoming page during active call: |
| The system can be set to either: |
| • Put an active call on hold, and broadcast the incoming page. |
| • Archive the page until you hang up from the call. |
| This feature is set by your system administrator. |
| Note: Business Series Terminals: a call on mute when the page comes |
| in, will not remain muted when it is released from hold after the page. |
|
|
Pause | FEATURE 78 |
| Program in an external autodial sequence to insert a |
| For pulse dialing: * also inserts a |
|
|
Priority call | FEATURE 69 |
| Interrupt a person who is on a call. |
| A person on another call can press FEATURE 85 (Do Not Disturb) to block |
| priority calls. |
|
|
Page 9
