Telephone features
To send Hookswitch or DTMF during a conference call
Either system telephone engaged in a
Note: This feature is not available for i20xx telephones or Symbol NetVision handsets.
–To hear DTMF tones on both telephones during dial, activate Long Tones (FEATURE 808).
–To conference in someone through the trunk, use Link (FEATURE 71)
Contrast | FEATURE *7 plus a number from 1 to 9 to adjust the display contrast. | ||
adjustment | Press HOLD to set your choice. |
| |
|
|
| |
Dialing modes | FEATURE *82 |
| |
| Choose one of three methods of dialing. |
| |
| 1. | Press FEATURE *82. |
|
| 2. | Press # to select the mode. |
|
| 3. | Press HOLD to store the mode. |
|
| Standard Dial: Select a line, then dial the number. (Standard Dial is | ||
| always available, even when another dialing mode is selected.) | ||
| Automatic Dial: Dial the number without choosing a line button first. Your | ||
| prime line is automatically selected for the call. | ||
| |||
| the number by pressing the volume bar before placing the call. | ||
|
|
| |
Do Not Disturb | FEATURE 85 | Cancel: FEATURE #85 | |
When you are not on a call prevent all incoming calls, except priority calls, from ringing at your telephone. When you are on a call, block an incoming priority call.
Group Listening
FEATURE 802Cancel: FEATURE #802
Use both the handset and speaker while you are on a call. To avoid elec- tronic feedback, keep the handset away from the speaker during the call, and press RLS to hang up. Note: Most of the portable handsets do not have speakers, so cannot use this feature.
Page 6
