Chapter 4 Configuring the Passport 8250 for operations 41
where
[set] configures the clocking scheme for the Passport 8250 device.
For details on the clockconfig parameters, see “Clockconfig command parameters” (page 41).
Table 4
Clockconfig command parameters
Parameter | Values | Definition | |
|
|
|
|
External Primary | 0 | = network board (default) | The board that |
Board Number | 1 | = service board in slot 1 | contains the |
| 2 | = service board in slot 2 | primary port. |
| 3 | = service board in slot 3 |
|
|
|
| |
External Primary | When External Primary Board | The primary port. | |
Port Number | Number is 1, 2, or 3, 1 to 16 for |
| |
| the T1/E1 ports. |
| |
| When External Primary Board |
| |
| Number is 0, 3 for the ATM |
| |
| uplink port (default). |
| |
|
|
| |
External Secondary | The same as the External | The board that | |
Board Number | Primary Board Number. | contains the | |
|
|
| secondary port. |
|
|
| |
External Secondary | The same as the External | The secondary | |
Port Number | Primary Port Number. | port. | |
(Sheet 1 of 2)
Passport 8250 Installation Guide R2.2
