Nortel Networks ELO ES24 manual Vii, France and Peru only

France and Peru only

This unit cannot be powered from IT. supplies. If your supplies are of IT type, this unit must

be powered by 230 V (2P+T) via an isolation transformer ratio 1:1, with the secondary connection point labelled Neutral, connected directly to earth (ground).

†Impédance à la terre

Power Cord Set
U.S.A. and Canada	The cord set must be UL-approved and CSA certified.
	The minimum specifications for the flexible cord are: - No. 18
	AWG - not longer than 2 meters, or 16 AWG. - Type SV or SJ -
	3-conductor
	The cord set must have a rated current capacity of at least 10A.
	The attachment plug must be an earth-grounding type with
	NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V)
	configuration.
Denmark	The supply plug must comply with Section 107-2-D1, Standard
	DK2-1a or DK2-5a.
Switzerland	The supply plug must comply with SEV/ASE 1011.
U.K.	The supply plug must comply with BS1363 (3-pin 13 A) and be
	fit-ted with a 5 A fuse which complies with BS1362.
	The mains cord must be <HAR> or <BASEC> marked and be
	of type HO3VVF3GO.75 (minimum).
Europe	The supply plug must comply with CEE7/7 (.SCHUKO.).
	The mains cord must be <HAR> or <BASEC> marked and be
	of type HO3VVF3GO.75 (minimum).
	IEC-320 receptacle.

vii