Page 3 - Enterprise Edge Telephone Feature Card
Automatic Dial: Dial the number without choosing a line button first. Your prime
line is automatically selected for the call.
Pre-Dial: Dial the number, then press a line button to place the call. Edit the
number by pressing √ before placing the call.
ƒ°fi Cancel ƒ£°fi
When you are not on a call prevent all incoming calls, except priority calls, from
ringing at your telephone. When you are on a call, block an incoming priority call.
ƒ°‚¤ Cancel ƒ£°‚¤
Use both the receiver and speaker while you are on a call. To avoid electronic
feedback, keep the receiver away from the speaker during the call, and press
® to hang up.
˙
Temporarily suspend a call.
To retrieve a held call, press the line button for the held call.
(Press ˙ on the M7100 telephone.)
Exclusive Hold
ƒ‡· or ƒ˙
Temporarily suspend a call and prevent other telephones from picking it up.
ƒ•fi‚⁄
Select English as the language for the telephone display.
ƒ•fi‚¤
Select French as the language for the telephone display.
ƒ•fi‚‹
Select Spanish as the language for the telephone display.
ƒfi
Automatically redial the last external telephone number that you dialed.
ƒfl›
With a line pool, telephones can share several lines for making calls.
1. Press ƒfl› or ∆.
2. Enter a line pool access code. (See your system coordinator for a list.)
ƒ°› Cancel ƒ£°›
Send calls arriving on an external line to another telephone outside your
Enterprise Edge system. (Some external lines may not support this feature. See
your system coordinator.) This feature is not available on the M7100 telephone.
ƒ‡⁄
Generate a Link signal ‹ to access a PBX or other host exchange.
ƒ°‚°
Generate a tone for as long as you hold down a button. This is used to
communicate with devices like fax or answering machines. Long tones are in
effect only for your current call.
D
o
N
ot
Disturb
G
roup
Listening
Hold
Language
Choice
Last
Number
Redial
Line pools
Line
Redirection
Link
Long Tones