Page 4 - Enterprise Edge Telephone Feature Card
ƒ⁄ Cancel ƒ£⁄
Send a message to an Enterprise Edge telephone’s display to have someone call
you back.
To view and reply to your messages:
1. Press ƒflfi.
2. Press • and £ to view your message list.
3. Press ‚ to call the person who left you the message.
To erase a message:
1. Press ˙ while viewing a message.
ƒ•°⁄
Change the position of your line or hunt group buttons.
1. Press ƒ•°⁄.
2. Press the line button that you want to move.
3. Press the button that you want to move the line to.
4. Press ®. The two buttons are exchanged.
5. Switch the button caps.
Line buttons cannot be exchanged with intercom, answer or Handsfree/Mute
buttons.
ƒ•°⁄·
Block the outgoing name and/or number on a per-call basis.
1. Press ƒ•°⁄·.
ƒfl‚ and code (1 to 3) and zone (0 to 6)
Make a page announcement through either the internal (code 1 ) or external (code
2) speakers, or both (code 3). Zone 0 pages all zones.
Page announcements are programmed to timeout after a pre-selected amount of
time which is set by your installer.
Internal page
ƒfl⁄ and zone (0 to 6)
Make a page announcement to all, or to a specific group of Enterprise Edge
telephones, through the telephone speakers. Zone 0 pages all zones.
External page
ƒfl¤
Make a page announcement through an external loudspeaker system.
Internal and external page
ƒfl‹ and zone (0 to 6)
Make a page announcement through both your Enterprise Edge telephone
speakers and an external loudspeaker system. Zone 0 pages all zon es.
ƒ‡°
Program in an external autodial sequence to insert a 1.5 second delay ›.
For pulse dialing: • also inserts a 1.5 second delay.
ƒfl·
Interrupt a person who is on a call or using Do Not Disturb.
A person on another call can press ƒ°fito block your priority call.
Messages
Moving line
buttons
Name and
number
blocking
Page
Pause
Priority