Nortel Networks manual Modifying L2TP IP Interface Addresses, Choose L2TP IP Interface

Customizing L2TP Services

Modifying L2TP IP Interface Addresses

The L2TP IP Interface List window lists the L2TP IP interface addresses for each slot that has L2TP configured. The LNS uses the addresses internally to identify the remote sites.

For more information about the L2TP IP interface, see “ L2TP IP Interface Addresses” on page 1-16.

To change an address on the list, complete the following tasks:

Site Manager Procedure

You do this		System responds
1.	In the Configuration Manager window,	The Protocols menu opens.
	choose Protocols.
2.	Choose IP.	The IP menu opens.
3.	Choose L2TP.	The L2TP menu opens.
4.	Choose L2TP IP Interface.	The L2TP IP Interface List window opens.
5.	Select an LNS entry from the list.
6.	Click on Change.	The L2TP IP Interface window opens.
7.	Modify the following parameters:
	• L2TP IP Interface Address
	• Subnet Mask
	Click on Help or see the parameter
	descriptions beginning on page A-11.
8.	Click on OK.	You return to the L2TP IP Interface List
		window. The new address appears in the
		list.
9.	Click on Done.	You return to the Configuration Manager
		window.

303532-A Rev 00 3-9