Nortel Networks LIP-6830 Making a Call, Putting a Call on Hold, Transferring Calls, Announced

LIP-6830 User Guide

2.2Making a Call

You can make a call using on-hook or off-hook dialing.

To place a call:
1) Lift the handset, press	, press	, or press Line button.

2)Dial the destination phone number; when the called party answers, begin speaking (the LCD will display the elapsed time of the call).

To end the call:

1)Replace the handset, press , press , press [EndC] Softkey, or press Line button.

2.3Putting a Call on Hold

You can place a call in a waiting state; the held party cannot hear you and you cannot hear the held party. You can answer or place other calls while a call is on hold.

To place a call on Hold:		or [Hold] Softkey.
1)	Put a call on hold by pressing
To retrieve a held call:			, or press [Rsum] Softkey.
1)	To return to the held call, press the blinking Line button,

NOTE: If multiple calls are on hold, a list of available calls on the Line will display. Use the [Prev]-[Next]Softkeys to select the desired call, “Retrieve Call Idx. #”, and press the [ OK ] Softkey.

If you place a call on hold and return to idle, you may receive Call Hold Ringback tone.

2.4Transferring Calls, Announced

You can send an active call to another extension and either announce the call or hang-up to complete the transfer.

To transfer an active call:

1)Press [Trns] Softkey.

2)Dial the number you wish to receive the transfer.

3)You may await answer and then hang-up, or just hang up to complete the transfer.

To cancel the Transfer:

1)Press [Cncl] Softkey.

2.5Transferring Calls, Blind/Unannounced

You can transfer an active call to another extension without talking to the party who is to receive the call, using Blind Transfer. The caller is transferred to the new party without verifying that the new party is there or willing to receive the call.

6 June 07