124
M3901 Feature Operation

Set up a Conference call

You c an set up a Conference call for up to six people (including yourself). Contact
your network administrator to determine the maximum number of people your
system allows on a conference call.
To use the Conference Call feature:
/1. Press the Hold Key to put the active
call on hold.
Note: The previous step is not required if
the Automatic Hold feature is active.
/2. Press the Features Key.
3. Press the Dial Pad Number Key for the
Conference feature.
4. Dial the number of the party you want
to add to the call.
/5. Press the Features Key.
6. Press the Dial Pad Number Key for the
Conference feature.
Note 1: Repeat these step to add more
parties to the conference (up to six).
Note 2: Press the Goodbye Key, if you
make an error while dialing the number or
if you receive a busy signal.
To return to the original caller:
/Press the Line (DN) Key.
Hold
Feature
Fx
Feature
Fx
Line