Nortel Networks M7100N manual Making and answering calls

Making and answering calls

Answering calls	1.	When your telephone rings, lift your handset.
		You are immediately connected to the call.
Making external	Depending upon the dialling mode programmed for your telephone, you
calls	may be able to dial your call before lifting your handset.
	1.	Pick up the handset.
	2.	Dial â9(your system’s exchange line access code or a line pool
		access code).
	3.	Dial the external telephone number.
Making internal
	1.	Pick up the handset.
calls	2.	Dial the internal number.
	Note: Extension numbers and the exchange line access code are
		supplied by your System Administrator.
Making or	The M7100N telephone allows you to have two calls active at the same
answering a	time.
second call	You can switch between calls using œ.

To answer a second call while on another call

1.Press œto put the first call on hold.

The second call automatically comes onto the line.

To hold a call and make a second call

1.Press œto put the first call on hold.

2.Dial the telephone number for the second call.

To return to the first call

1.Press œagain to return to the first call on hold. The second call is automatically put on hold.

œTo hold a call

1.Press œ.

2.Press œagain to return to the call on hold.

Check the display for confirmation or additional information.

Note: If you have difficulty selecting a line on your M7100N telephone, ask your System Administrator to check your telephone's programming. Your telephone must be assigned to use an exchange line or line pool.

Page 2 Enterprise Edge M7100N User Card