Nortel Networks M7100N manual Setting up the telephone, Attach the stand

Setting up the telephone

Connecting the cords		ATTENTION Before attempting to carry
1	2	out any work on the telephone, ensure
		that the line cord is unplugged from the
Press here firmly
		wall socket.
until it clicks, to		To remove any of the cords, squeeze
attach the stand.		the release latch on the plug and gently
		pull the plug from the socket.
		Connect the handset cord to the jack
		labelled with the telephone icon and
		route the cord as shown.
		Route the line cord through the stand
		and connect the cord to the telephone
		jack that is marked with the jack icon.
		Attach the stand using either pair of
		slots; to raise the back of the telephone
Press here to		to its highest position, use these slots.
		Once the above work is complete, plug
remove the stand.
		the line cord back into its wall socket.

Page 4 Enterprise Edge M7100N User Card