Nortel Networks Norstar ICS Conference To independently hold two calls, Contrast ≤‡, Dialing ≤¤

Conference continued

To independently hold two calls:

Press the line or intercom button of the first caller, then press ≥. The second caller is automatically put on hold. To re-establish the conference, retrieve one call from hold, press ≤‹, then retrieve the second call from hold.

Contrast ≤•‡

adjustment Adjust the contrast of your display.

Press ≤•‡, then press a number from ⁄to ·(depending on your telephone). Press ≥to set your choice.

Dialing ≤•°¤

modes Choose one of three methods of dialing.

1.Press ≤•°¤.

2.Press £to select the mode.

3.Press ≥ to store the mode.

Standard Dial: Select a line, then dial the number. (Standard Dial is always available, even when another dialing mode is selected.) Automatic Dial: Dial the number without choosing a line button first. Your prime line is automatically selected for the call.

Pre-Dial: Dial the number, then press a line button to place the call. Edit the number by pressing √ before placing the call.

Do Not	≤°fi	Cancel ≤£°fi
Disturb	When you are not on a call prevent all incoming calls, except priority
	calls, from ringing at your telephone. When you are on a call, block an
	incoming priority call.

Group Listening

≤°‚¤ Cancel ≤£°‚¤

Use both the handset and speaker while you are on a call. To avoid electronic feedback, keep the handset away from the speaker during the call, and press ®to hang up.

Hold	≥
	Temporarily suspend a call.
	To retrieve a held call, press the line button for the held call.
	(Press ≥on the T7100/M7100 telephone.)
	Exclusive Hold ≤‡·or ≤≥
	Temporarily suspend a call and prevent other telephones from picking
	it up.
Language	≤•fi‚⁄Select Primary Language for the telephone display.
Choice	≤•fi‚¤Select Alternate Language for the telephone display.
	≤•fi‚‹Select Alternate Language 2 for the telephone display.
	≤•fi‚›Select Alternate Language 3 for the telephone display.

3