![](/images/new-backgrounds/1251501/25150115x1.webp)
Ring | ≤•°‚ |
volume | Make your telephone ring so that you can adjust the volume. You can |
| also adjust the volume any time your telephone rings. |
|
|
Run/Stop | ≤•· |
| Store more than one autodial number or external carrier feature code |
| on one memory button by inserting a break point ß between numbers |
| or codes. |
| The first press of the button dials the first number or code; the next |
| press dials the next number or code. You can program up to four |
| numbers or codes separated by break points. |
|
|
Saved | ≤fl‡ |
Number | Save a number to redial later. Enter the code while you are on a call |
Redial | that you have dialed to save the number. Enter the code when you are |
| not on a call to redial the saved number. |
Service Schedules
Show service schedules ≤°‡‚
Display the modes that have been turned on at a designated control set.
Ringing service
≤°‡⁄ Cancel ≤£°‡⁄
Turn on one of six schedules for alternative ringing/call answering arrangements from a designated control telephone.
Restrictions service
≤°‡¤ Cancel ≤£°‡¤
Turn on one of six services for restrictions on particular lines or telephones from a designated control telephone. You will be required to enter a password.
| Routing services |
| |
| ≤°‡‹ | Cancel ≤£°‡‹ | |
| Turn on one of six services for routing on particular lines or telephones | ||
| from a designated control telephone. You will be required to enter a | ||
| password. |
| |
|
|
| |
Silent | ≤•fifi‚ |
| |
monitoring | If your | ||
(Hunt | telephone, use this code to start monitoring members of a hunt group. | ||
groups) | 1. | Press ≤•fifi‚. |
|
| 2. | Enter the SM password provided by your system administrator. | |
| 3. | Enter the local (DN) of the Hunt group telephone you want to | |
|
| monitor. |
|
Note: If the telephone does not have a current call, or if the call is an internal call, you will not be able to monitor the call.
6