Nortel Networks P0886629 - page 41

Setting up and maintaining Fax-on-demand mailboxes 39

P0886629 Issue 1.0 FAX Set Up and Operation Guide

For more information about designing, building, changing, saving or enabling a

CCR Tree, refer to the Norstar Voice Mail Set Up and Operation Guide.

Changing a Fax Point

From CCR, you can change the Fax-on-demand Mailbox number and destination

of a Fax Point. To change the greeting, call method or Fax messages available, you

must open the Fax-on-demand Mailbox via . For information

about changing the parameters of Fax-on-demand Mailboxes, refer to "Changing

the parameters of a Fax-on-demand Mailbox" on page 28.

To change a Fax Point:

14. To save the Tree, press END and follow the

instructions that appear on the display.

15. Press to end this programming session.

1. Press .

2. Enter the System Coordinator Mailbox number and

password and press OK.

3. Press OTHR.

4. Press CCR.

5. Press ADMIN.

6. Enter the CCR Tree number and press OK. The CCR

Tree number is a number from 1 to 4.

7. Press CHNG.

8. Enter the Fax Point Path number and press OK.

9. Press CHNG. The x represents the Path number.

10. Press NEXT.

11. Press CHNG. The type shown on this display is the

current destination type.

Path:

RETRY OK

Log:

QUIT RETRY

Admin

MBOX AA

Admin

GLIST OTHR

CCR Admin

CCR tree:

RETRY

Tree: 1

PRINT QUIT

Path:

RETRY END

<x> Fax

ERASE OK

Mbox: <xxx>

CHNG

Dest: <type>

OK

Contents

Main Page Contents Page Page How this guide is organized How to use this guide Conventions Prerequisites What appears on the display Other documents Who can use FAX How FAX works Learning about FAX About Fax Mail About the Virtual fax line Message Notication About Fax-on-demand About Fax Answering About Fax Overow Fax System Group message (Fax Broadcast) About FAX with CCR About Norstar Voice Mail reports Setting up and maintaining FAX 3 Entering characters using the Norstar Dialpad Setting the FAX System parameters Page Page Changing the FAX System parameters Adding a Fax Overow Mailbox Page Changing the Fax Overow Mailbox parameters Deleting a Fax Overow Mailbox Adding a Fax System Group List Adding fax machine members to a Fax System Group List Sending a Fax System Group message (Fax Broadcast) Page Setting up and maintaining Fax-on-demand mailboxes 4 About Fax-on-demand Mailboxes Adding a Fax-on-demand Mailbox Page Changing the parameters of a Fax-on-demand Mailbox Choosing a Fax-on-demand call method Page Adding a Fax message from a fax machine telephone Adding a Fax message from a disk Page Recording a Fax-on-demand Mailbox Greeting Page Deleting and viewing fax selection numbers in a Fax-on-demand Mailbox Including a Fax-on-demand Mailbox in CCR Page Page Page Deleting a Fax-on-demand Mailbox Troubleshooting FAX 5 Problems and solutions Page Page Error messages Appears when trying to print faxes when there are no faxes in the mailbox. Appears when an incorrect extension is entered. Check the DN length or use the Company Directory. Appears when an incorrect mailbox number is entered. Appears when a message is sent to a mailbox that is not initialized. When a FAX feature is attempted after the FAX hardware has been removed or FAX has been disabled. When PRESET is selected before it has been set up. Appears when the Fax-on-demand mailbox has not been initialized. Appears when a Fax-on-demand mailbox is not initialized. Page Examples and Tips 6 Examples of FAX set ups FAX Tips Page Appendix A: FAX Programming Record Before you begin Programming overview Pre-installation checklist Dialing Translation Parameters Mailbox Administration Mailbox Conguration Fax System Group Lists Appendix B: Dialing Translation How the Dialing Translation Table works Page Page Dialing Translation Parameters Page Dialing Translation Table Administration Page Page Page Page Technician Created Dialing Translation Table Installing the Dialing Translation Table onto the Norstar Voice Mail Sys- tem Page Page Page Appendix C: Technical content of a loadable .PCX le Glossary Page Page Page Page Index Page Tell us what you think...